How to Maintain Toilet Paper Cutting Machine?

Question 1: Why dose the Toilet Paper Cutting machine act,but not turn on the foot switch When the machine is semi-active ?

Reasons : The footswitch of toilet paper cutting machine is damaged or the water in the foot switch or the manual start button switch is broken.

Solution: Replace the new switch, socket, push button switch or disassemble the repair associated damage.

Question 2: When the semi-active operation is performed, the foot switch slide is lowered, and then rolled up and then raised.

Reasons: The proximity switch on the left side of the cross slide is damaged or disconnected.

Solution: Replace the switch or the switch connection.

Question 3: When the semi-active work is performed, the foot slide switch is lowered, and the print stand does not move after being moved to the left.

Reasons:
a. The left side switch of the horizontal slide is not sensed or has doubts.
b. The micro switch in the foot switch does not move.
Solution:
a. Adjust the left side proximity switch sensing point or replace the good proximity switch;
b. Adjust, correct or replace the new microswitch with the microswitch in the footswitch.

Question 4: When the semi-active operation is stepped on the foot switch, the slide seat is lowered to the left and then rises but not moved to the right.

Reasons: There is a problem with the proximity switch on the upper left side of the vertical slide or the proximity switch.

Solution: Adjust the proximity switch or the very close proximity switch.

Question 5: After the action is switched, the rising motion is slow and half beat.

Reasons: The solenoid valve is blocked by a foreign body or the solenoid valve is faulty.

Solution: Remove the solenoid valve to clean or replace the solenoid valve.

Question 6: manual, semi-active all do not move, the power light is on.

Reasons: A low-voltage side fuse blown, no gas source enters, and all the solenoid valves have problems.

Solution: Change the low-voltage side fuse to see if the pressure reaches 4-7kg/cm. The solenoid valve is very small, and most of them are disconnected.

Now It’s Your Turn

I hoped you enjoyed my detailed information for starting toilet paper business.

Now I want to hear from you:

Which parts from this post are you most excited to know ?

Are you going to know more other kinds of related products? Or do you want to do deep research on this line?

Let me know by leaving a quick comment.